امروز : سه شنبه شانزدهم آذر 1400
Introduction
شنبه ششم دی 1393 ساعت 2:21 ب ظ - توسط : مصطفی طالبی


Mostafa Talebitooti 
PhD in Applied Mechanics
Faculty member of Qom University of Technology
Nationality: Iranian
Address: School of Mechanical Engineering, Qom University of Technology, Khoda Karam St. Qom, 37195-1519, Iran.
Marital Status: Married
Email Address: mtalebi@iust.ac.ir
B.Sc.: Guilan University, Rasht, Iran, 2002-2006 (Mechanical Engineering-Solid Mechanics)
Graduated with G.P.A 16.63/20 (Second Rank)
M.Sc.: Isfahan University of Technology (IUT), Isfahan, Iran, 2006-2008 (Mechanical Engineering-Applied Design)
Graduated with G.P.A 17.44/20 (Top 5%)
Dissertation Title: Free Vibration Analysis of Rotating Orthogonally Stiffened Cylindrical Shells

Ph.D.: Iran University of Science and Technology (IUST), Tehran, Iran, 2008-2013
Graduated with G.P.A 18.36/20 (Top 5%) (Mechanical Engineering-Applied Design)
Dissertation Title: 3D Vibration Analysis and Bifurcation Phenomenon of Rotating Stiffened Composite Conical Shells
Applied mechanics
Vibration and buckling of plates & shells
Structure optimization
Vibro-Acoustics
Static and dynamic analysis of laminated composites and FGMs
Design of cryogenic structures
Third rank, IUT University 2008
Second rank, Guilan University 2006
Outstanding Student Award, Guilan University 2005
3rd Position Award, Young Researcher Club 2003
Excellent Level in PhD Thesis.

JCR Journals:
[1] M. Talebitooti, M. Ghayour, S. Ziaei-Rad, R. Talebitooti ”Free Vibrations of Rotating Composite Conical Shells with Stringer and Ring Stiffeners” , Archive of Applied Mechanics, Vol.80, No.3, pp:201-2015 (2010). https://doi.org/10.1007/s00419-009-0311-4
[2] M. Ghayour, S. Ziaei Rad, R. Talebitooti, M. Talebitooti, “Dynamic Analysis and Critical Speed of Pressurized Rotating Composite Laminated Conical Shells Using Generalized Differential Quadrature Method.”, Journal of mechanics, Vol.26, No.1, pp: 62-70,(2010). https://doi.org/10.1017/S1727719100003725
[3] K. Daneshjou, M. Talebitooti, R. Talebitooti, H.S. Googarchin, “Dynamic Analysis and Critical Speed of Rotating Laminated Conical Shells with Orthogonal Stiffeners Using Generalized Differential Quadrature Method”, Latin American Journal of Solids and Structures, Vol. 10, pp: 349-390, (2013). https://doi.org/10.1590/S1679-78252013000200007
[4] M. Talebitooti, K. Daneshjou, R. Talebitooti, “Vibration and Critical Speed of Orthogonally Stiffened Rotating FG Cylindrical Shell under Thermo-mechanical Loads Using Differential Quadrature Method”, Journal of Thermal Stress, Vol. 36, pp: 160-188, (2013) https://doi.org/10.1080/01495739.2013.764807
[5] M. Talebitooti, ” Three-Dimensional Free Vibration Analysis of Rotating Laminated Conical Shells: Layerwise-Differential Quadrature (LW-DQ) Method”, Archive of Applied Mechanic, Vol. 83, pp: 765-781, (2013) https://doi.org/10.1007/s00419-012-0716-3
[6] K. Daneshjou, M. Talebitooti, R. Talebitooti, “Free Vibration and Critical Speed of Moderately Thick Rotating Laminated Composite Conical Shell Using GDQ Method”, Applied Mathematics and Mechanics, Vol. 34(4), pp: 437-456, (2013). 10.1007/s10483-013-1682-8
[7] K. Daneshjou, M. Talebitooti, “Three-Dimensional Free Vibration Analysis of Rotating Stiffened Composite Cylindrical Shells: Layerwise-Differential Quadrature Method” Mechanics of Composite Materials, Vol. 50(1), pp:31-54, (2014). https://doi.org/10.1007/s11029-014-9390-6
[8] M. Talebitooti, ”Analytical and finite-element solutions for the buckling of composite sandwich conical shell with clamped ends under external pressure" Archive of Applied Mechanics, Vol. 87, No. 1, pp: 59–73(2016). https://doi.org/10.1007/s00419-016-1176-y
[9] M. Talebitooti, ”Thermal effect on free vibration of ring-stiffened rotating functionally graded conical shell with clamped ends" Mechanics of Advanced Materials and Structures, Vol. 25, No. 2, pp: 155-165 (2018). https://doi.org/10.1080/15376494.2016.1255809
[10] M. Hosseini, M. Talebitooti, "Buckling analysis of moderately thick FG carbon nanotube reinforced composite conical shells under axial compression by DQM", Mechanics of Advanced Materials and Structures, Vol. 25, No. 8, pp: 647-656 (2018). https://doi.org/10.1080/15376494.2017.1308597
[11] M. Talebitooti, "A mixed layerwise-differential quadrature method for 3-D vibration and buckling analyses of orthogonally stiffened composite conical shell". International Journal of Acoustics and Vibration, Vol. 24, No. 2, pp:217-227 (2019). 10.20855/ijav.2019.24.21167
[12] M. Talebitooti, "Three-Dimensional Free Vibration Analysis and Critical Speed of Pressurized Rotating Functionally Graded Cylindrical Shells" Iranian Journal of Science and Technology, Vol. 3, No. 2, pp:113-126, (2019). https://doi.org/10.1007/s40997-017-0115-z
[13] M Talebitooti, M Fadaee , "Effects of carbon nanotube reinforcements on vibration suppression of magnetorheological fluid sandwich beam", Journal of Intelligent Material Systems and Structures, 30 (7), 1053-1069 (2019). https://doi.org/10.1177/1045389X19828830
[14] M Golchi, M Talebitooti, R Talebitooti, "Thermal buckling and free vibration of FG truncated conical shells with stringer and ring stiffeners using differential quadrature method", Mechanics Based Design of Structures and Machines 47 (3), 255-282 (2019). https://doi.org/10.1080/15397734.2018.1545588
[15] M Fadaee, M Talebitooti, "Dynamic stability of the rotating carbon nanotube-reinforced adaptive sandwich beams with magnetorheological elastomer core", Journal of Sandwich Structures & Materials, 1099636219849414 (2019). https://doi.org/10.1177/1099636219849414
[16] M Talebitooti, M Fadaee, "A magnetostrictive active vibration control approach for rotating functionally graded carbon nanotube-reinforced sandwich composite beam", Smart Materials and Structures 28 (7), 075007 (2019). https://doi.org/10.1088/1361-665X/ab1e1f
[17] M Talebitooti, "A semi-analytical solution for free vibration analysis of rotating carbon nanotube with various boundary conditions based on nonlocal theory", Materials Research Express 6 (9), 095012 (2019). https://doi.org/10.1088/2053-1591/ab2bbc.
[18] M Fadaee, M Talebitooti, "Active vibration control of carbon nanotube-reinforced composite beam submerged in fluid using magnetostrictive layers", Mechanics Based Design of Structures and Machines, 1-18 (2020). https://doi.org/10.1080/15397734.2020.1728546.
[19] AH Soureshjani, R Talebitooti, M Talebitooti, "A semi-analytical approach on the effect of external lateral pressure on free vibration of joined sandwich aerospace composite conical-conical shells", Aerospace Science and Technology 99, 105559 (2020) https://doi.org/10.1016/j.ast.2019.105559.
[20] M Ahmadi, M Talebitooti, R Talebitooti, "Analytical investigation on sound transmission loss of functionally graded nanocomposite cylindrical shells reinforced by carbon nanotubes", Mechanics Based Design of Structures and Machines, 1-18 (2020). https://doi.org/10.1080/15397734.2020.1805333.
[21] AH Soureshjani, R Talebitooti, M Talebitooti, "Thermal effects on the free vibration of joined FG-CNTRC conical-conical shells", Thin-Walled Structures 156, 106960 (2020). https://doi.org/10.1016/j.tws.2020.106960.
[22] I Pakravan, AH Soureshjani, R Talebitooti, M Talebitooti, "Haar wavelet technique applied on the functionally graded carbon nanotube reinforced conical shells to study free vibration and buckling behaviors in thermal environments", Journal of Vibration and Control (2021). https://doi.org/10.1177/1077546321996931.



ISC Journals & Conference Papers:
• M. Talebitooti, M. Ghayour, S. Ziaei-Rad, R. Talebitooti ”Free Vibrations of Rotating Composite Conical Shells with.
• [8] K. Daneshjou, M. TalebiTooti, R. Talebitooti “Vibration and Critical Speed of Axially loaded Rotating Orthotropic Cylindrical Shells"‌, Journal of aerospace Science and Technology, Vol.4, No.3, 1-7, Sep. (2007).
• [9] K. Daneshjou, R. Madoliat, M. TalebiTooti, “3D Vibration Analysis and Critical Speed of Orthogonally Stiffened Composite Cylindrical Shells under Axial Load and Pressure”, Modares Journal of Mechanics Engineering, Vol. 12(6), 80-94, (2013) (in Persian).
• [1] M. TalebiTooti, R. TalebiTooti, M. Torabi, “Vibration and Critical Speed of Axially loaded Rotating Orthotropic Cylindrical Shells”, 6th Iranian Aerospace Society Conf. Feb. 2007.
• [2] M. Talebitooti, R. Talebitooti, R. Ansari, M. Darvizeh, “Vibration of Rotating Composite Cylindrical Shells considering third order shear deformation” ”, 12th ISME conf., 2007 (in persian).
• [3] M. Ghayour, M. Talebitooti, R. Talebitooti, H. Nahvi ”Free Vibrations of Rotating Composite Cylindrical Shells with Stringer and Ring Stiffeners Subjected to Axial Load”, 12th ISME conf., 2008 (in Persian).
• [4] M. Ghayour, S. Ziaei Rad, R. Talebitooti, M. Talebitooti, “Dynamic Analysis and Critical Speed of Axially loaded Rotating Composite Laminated Cylindrical Shells Using GDQ Method”, 8th Iranian Aerospace Society Conf. , 2009(in Persian).
• [5] M. Ghayour , S.Z. Rad, R. Talebitooti, M. Talebitooti, “Dynamic Analysis and Critical Speed of Pressurized Rotating Composite Laminated Conical Shells Using Generalized Differential Quadrature Method” , 17th ISME conf., 2009.
• [6] M. Ghayour , S.Z. Rad, R. Talebitooti, M. Talebitooti, “Free Vibrations of Rotating Composite Conical Shells with Stringer and Ring Stiffeners” , 17th ISME conf., 2009.
• [7] K. Daneshjou, M. TalebiTooti, “Vibration Analysis and Critical Speed of Rotating Stiffened FGM Cylindrical Shells under Axial Load Using GDQ”, 18th ISME conf., 2010(in Persian).
• [8] K. Daneshjou, R. Madoliat, M. TalebiTooti, “Vibration Analysis and Critical Speed of Rotating Stiffened Composite Cylindrical Shells Using Layerwise Theory” 11th Iranian Aerospace Society Conf., 2011(in Persian).
• [9] K. Daneshjou, R. Madoliat, M. TalebiTooti, “Vibration Analysis and Critical Speed of Moderately Thick Composite Conical Shells Using GDQM” 11th Iranian Aerospace Society Conf., 2011(in Persian).
• [10] K. Daneshjou, M. TalebiTooti, “Dynamic Analysis and Critical Speed of Orthogonally Stiffened Composite Conical Shells Using GDQ Method” 11th Iranian Aerospace Society Conf., 2011(in Persian).
• [11] M.M. Shojaee, M.H.S. Sharbati, H. Saeidee, M. Fadaee, M. Talebitooti, “Weight Optimization of Orthogonally Stiffened Cylindrical Shells under Stress and Buckling Constraints Using Couple of GA and Python”, 12th Iranian Aerospace Society Conf., 2012(in Persian).
• [12] M.M. Shojaee, M.H.S. Sharbati, H. Saeidee, M. Fadaee, M. Talebitooti, “Optimum Design of Conical Shells with
Ring and Stringer Stiffened Using Genetic Algorithm”, 12th Iranian Aerospace Society Conf., 2012(in Persian).

Internship, AZIN TANEH Comp., Tehran, Iran
Cooperation with Engineering Design Dept. (Design and Manufacturing of Automotive Brakes).
2006-2013, Defense Industries:
1- Statics and vibration analysis of structures with FEM.
2- Analysis and design of stiffened cylindrical with rings and stringers.
3- Analysis and design of orthogonally stiffened conical shells.
3- Analysis and design of super lightweight structures.
4- Optimum weight design of structures.
Qom University of Technology
1- Dynamics of Machinery
2- Statics
3- Design of Machine Elements
University of Science and Technology
1- Automatic Control
2- Dynamics
3- Design of Machine Elements
 Islamic Azad University
1- Statics
2- Design of Machine Elements
3- Mathematics
 Modaresanesharif Institute
1- Mechanical Vibrations
2- Design of Machine Elements
3- Statics
Expert in:
Programming: Matlab, Maple.
Other: Ansys, Abaqus, SolidWorks, Visual Nastran, Cosmos.